Page 10 of 11

Re: Project "Plonker"

PostPosted: Sun Aug 02, 2020 10:12 pm
by mec
Hi All

Well Project Plonker has hit you tube !! If you fancy seeing me make my youtube debut on my mate steve's channel, Fix, drive,fly ride have a look at the following link :thumbsup: :thumbsup: ...

https://youtu.be/FicpC-s0BSc

:dance: :dance:

Re: Project "Plonker"

PostPosted: Mon Aug 03, 2020 10:26 am
by eric
Nice.....I watched that video and depending on the camera angle I went from "jesus your garage is huge" to "wowzers that's a small garage"

Re: Project "Plonker"

PostPosted: Mon Aug 03, 2020 5:49 pm
by mec
Lol the garage is double length and and the front half is probly a car and a 1/4 wide then it steps in slightly on the rear half, i did the delorean rebuild that u saw on my resto thread in there too

Re: Project "Plonker"

PostPosted: Sat Sep 19, 2020 6:51 pm
by mec
Hi all

Its been a while since my last update, not massive amounts done but some good progress, since test fitting the body i took the whole lot apart again and the Chavved banana sprang into action to take the chassis to the galv and p coat place (same place the D chassis went too) ...

20200824_063001 (Medium).jpg
20200824_063001 (Medium).jpg (300.74 KiB) Viewed 6956 times


This was about 3 weeks ago, and today i picked it up !!! ...

20200919_113257 (Medium).jpg
20200919_113257 (Medium).jpg (248.09 KiB) Viewed 6956 times


20200919_124809 (Medium).jpg
20200919_124809 (Medium).jpg (313.95 KiB) Viewed 6956 times


20200919_174549 (Medium).jpg
20200919_174549 (Medium).jpg (216.4 KiB) Viewed 6956 times


20200919_124924 (Medium).jpg
20200919_124924 (Medium).jpg (133.3 KiB) Viewed 6956 times


So now ive got the chassis back its time to start refurbing everything else and rebuilding it !

In the mean time since the last update Ive also bought a few engines to make the best one i can out of all the bits, Dan S came over for the day for an engine day and we got his engine running and also one of mine running too so thats a good start !

20200827_122418 (Medium).jpg
20200827_122418 (Medium).jpg (270.04 KiB) Viewed 6956 times


Ive also refurbed the steering column/box too ...

20200726_201342 (Medium).jpg
20200726_201342 (Medium).jpg (281.3 KiB) Viewed 6956 times


20200726_212020 (Medium).jpg
20200726_212020 (Medium).jpg (252.74 KiB) Viewed 6956 times


20200727_123850 (Medium).jpg
20200727_123850 (Medium).jpg (456.12 KiB) Viewed 6956 times


20200727_130021 (Medium).jpg
20200727_130021 (Medium).jpg (346.63 KiB) Viewed 6956 times


20200810_163102 (Medium).jpg
20200810_163102 (Medium).jpg (431.02 KiB) Viewed 6956 times


Also ive painted my exhaust in High temp Silver paint too ...

20200726_171920 (Medium).jpg
20200726_171920 (Medium).jpg (257.42 KiB) Viewed 6956 times


Thats about it for now folks :dance: :dance:

Re: Project "Plonker"

PostPosted: Sat Sep 19, 2020 8:55 pm
by bandit
Nice update Mec. Is that diarrhoea in the steering box? :lol:

Re: Project "Plonker"

PostPosted: Sun Sep 20, 2020 9:54 am
by A Van
Nice one

Can you take a look at Justin’s sometime?


Sent from my iPhone using Tapatalk

Re: Project "Plonker"

PostPosted: Sun Sep 20, 2020 11:03 am
by mec
bandit wrote:Nice update Mec. Is that diarrhoea in the steering box? :lol:



Yea it does look like that dunnit ! :lol: :lol:



Whats wrong with Justins Al ? Thought he had it sorted ??

Re: Project "Plonker"

PostPosted: Sun Sep 20, 2020 1:16 pm
by A Van
Think he has engine trouble


Sent from my iPhone using Tapatalk

Re: Project "Plonker"

PostPosted: Sun Sep 20, 2020 6:32 pm
by Dan 6511
We should do a van tec at Justin's mec.

Re: Project "Plonker"

PostPosted: Mon Sep 21, 2020 1:26 pm
by mec
Sounds like a plan Dan