Eurotec 2011 tool thread

[MikeWard]

Would anyone happen to have the correct size drill bit for use in the installation of the dead pedal?

I manged to keep enough signal to download the pdf from delorean.com.

Would anyone happen to have a nut sert tool (suitable for an M6 nut sert) and a 23/64 drill bit that I could borrow?

[RobvdVeer]

I'd like to a have 2/69 screw insert but there's nothing on ebay right now.

[Dan 6511]

Do you mean rivet-nuts?



I have a set but not sure if I go up to M6 or not.

[MikeWard]

Yep, it's rivet nuts It's labelled as a nut sert tool on the pdf.

[bozzzydmc]

Just be careful of any wiring looped down behind the carpet at the point of where your drilling, Ive heard of one guy who just happened to catch a wire in that area

[Daniel Shane]

Do you need the rivnut tool to fit them ? I have one if you do

Dan

[Admin-bloke]

Do you need the rivnut tool to fit them ? I have one if you do

Dan

Ooh a tool I haven't seen before

Bring it bring it

[Dan 6511]

I have the tool and the nuts with me

[bozzzydmc]

Hee hee

[MikeWard]

Do you need the rivnut tool to fit them ? I have one if you do

Dan

According to the destructions, a rivet nut tool is required to fit it http://www.delorean.com/pdf/deadpedal.pdf