Project 2456- Matthew Nickels, Lisburn, NI

[A Van]

Keep going Matt, It'll be worth it!!

[mnickels]

Keep going Matt, It'll be worth it!!

Cheers Al. I know it will be. I have eurotec in mind and hopefully it will happen. If it doesn't it will be VW Bora again but might trailer the car across regardless.

[bozzzydmc]

That being the case Matt, just bring the car with all the bits you have left to fit, we can all muck in and finish it off with you if you like buddy

Mike

[mnickels]

That being the case Matt, just bring the car with all the bits you have left to fit, we can all muck in and finish it off with you if you like buddy

Mike

I'll see what the cost is etc but hopefully it's not the case. Arran will need a 2 post lift installed in the car park at this rate lol

[RobvdVeer]

That being the case Matt, just bring the car with all the bits you have left to fit, we can all muck in and finish it off with you if you like buddy

Mike

I'll see what the cost is etc but hopefully it's not the case. Arran will need a 2 post lift installed in the car park at this rate lol

The best suggestion for eurotec entertainment i've heard so far!

[mnickels]

Deja vu.

The frame is now welded (the right way up). I'll clean up the welds and take photos later as it is pissing down. More wire brushing of the rear hub carriers and degreasing. Also wire brushed a bit more of the frame, this exposed 2 areas that required a small patch but now sorted as well.

[A Van]

Back on track then!

[mnickels]

Back on track then!

Hopefully Al

[Dan 6511]

Excelent news Matt. When is it going for galvanizing?

[mnickels]

Excelent news Matt. When is it going for galvanizing?

Will drop it up on Tuesday all being well