Disconnect the electrical connection from the coil labelled "1" (or "CB") and measure the voltage at the "15" (or B+)
What is the voltage at the top ceramic resistor right hand blade connection?
Admin-bloke wrote:Disconnect the electrical connection from the coil labelled "1" (or "CB") and measure the voltage at the "15" (or B+)
What is the voltage at the top ceramic resistor right hand blade connection?
Admin-bloke wrote:For now, double check that the electrical connector between the coil and the wire that goes to the bullhead is intact. (The one that was hung over your gearbox during your rebuild)
If you disconnect this, measure the resistance between the 2 pins on the wire that goes TO the coil (inductive pickup). This should be between 550 ohms to 650 ohms. If it is open circuit, you won't get a spark.
Good luck
Admin-bloke wrote:Voltage- yes
Current- yes
Resistance- yes
Juice- orange or lemon?