by Dan 6511 » Fri Jun 05, 2015 11:37 pm
Dukes Of Hammond wrote:When I block leak... Engine increases revs a little... I need a new Plug for it.. .. And then I'm guessing decrease revs at adjuster..
Probably a mix of the idle screw and the fuel/air mixture. Get it on an exhaust tester, standard MOT one is fine, and set mixture and then if revs still high then adjust idle speed, if that sods up the emissions then adjust mixture again. Eventually you'll get sweet spot with nice idle and correct emisions. Nick T will probably chime in with what the emissions should be on a stock car with no cat. Also make sure when at idle the microswitch is being closed properly.
Sell it Or Sorn it
Road trips:
2008: Mervyn's Delorean Weekend, Ireland
2008: DMC Europe Open House
2009: DMC Europe Open House
2009: Royal Delorean Weekend, Ireland
2010: Silvercoast, France
2010: Shanefest, Ireland
2010: Luxemburg & Nurburgring
2011: Eurofest, Belfast
2019: International DeLorean Meeting, Hamburg