At last I have taken the coil springs out at the front and the LCA's are out. Ready for SPAX and new LCA's.
I wanted to attack some of the rust elements below the LCA as it is a weather prone area and nigh impossible to get to when they are fitted. The problem is inside the box section as shown in the pics is also peeling and I can see the rust.
I did think it would just be the outside edge. So I have purchased POR15 along with the degreaser and pre-paint etching solution. But keeping in mind access and lack of and the fact these are water based and need washing off I cant see me getting much progress on the inner box section.
Can I seek some advice ? I was thinking just get as much of the loose stuff off then get some waxoil in there. I know its a marmite product but its going to stop rust worsening.
https://imgur.com/1Kz2nIY
https://imgur.com/7XWrf8L