VIN# 16951 - August 1982 - Manual - Black Interior

[DJK73]

Heh Domi where did you get the banjo bolt kit from?

Dan

[Domi]

I bought the kit from Josh at DPI:
http://www.deloreanindustries.com/banjo ... -complete/

[arranj]

I'm putting together a low price stainless kit of those bolts Dan, with washers - should be done within a week I think.

[Domi]

New wire, longer and bigger from the starter to the alternator

DSCN3380.JPG (435.53 KiB) Viewed 2995 times

New silicone pipe to the stainless pipe

DSCN3382.JPG (394.99 KiB) Viewed 2995 times

Put all the red silicone vacuum line in place

DSCN3384.JPG (434.54 KiB) Viewed 2995 times

DSCN3385.JPG (539.75 KiB) Viewed 2995 times

I wonder how you tight this part? Do I need a special tool? Thanks!

DSCN3386.JPG (331.84 KiB) Viewed 2995 times

[Domi]

Old fuel line from the frequency valve removed

DSCN3387.JPG (55.07 KiB) Viewed 2965 times

New stainless fuel line, let’s hope everything is okay with the clamp

DSCN3388.JPG (81.12 KiB) Viewed 2965 times

Go back into the engine compartment

DSCN3389.JPG (89.25 KiB) Viewed 2965 times

[andyd]

New stainless fuel line, let’s hope everything is okay with the clamp

Great work Domi!

I am not sure how high the pressure is on the line to the frequency valve is, but if you are concerned, screw drive fuel clips may be better than the spring type clips you have here?

Andy

[Domi]

No pressure in this pipes, but I guess you're right I'd better change them.

[Domi]

Finally decided to change them

DSCN3390.JPG (63.12 KiB) Viewed 2889 times

DSCN3391.JPG (65.65 KiB) Viewed 2889 times

[Domi]

Water pump is back into the engine compartment

DSCN3392.JPG (68.81 KiB) Viewed 2850 times

DSCN3393.JPG (92.25 KiB) Viewed 2850 times

New belt and screw

DSCN3394.JPG (66.82 KiB) Viewed 2850 times

Only one pipe on two, such a pain to put them back. I thought silicone pipes were easier to mount, but no...

DSCN3395.JPG (63.69 KiB) Viewed 2850 times

[mec]

coming along nicely !