De Lorean EuroTec

Posted: **Sat Jan 14, 2017 5:55 pm**

All arms are painted and I think they look good

: DSCN3781.JPG (73.44 KiB) Viewed 2758 times

: DSCN3782.JPG (94.29 KiB) Viewed 2758 times

: DSCN3783.JPG (75.03 KiB) Viewed 2758 times

: DSCN3784.JPG (71.48 KiB) Viewed 2758 times

Assembly of the arms

: DSCN3785.JPG (62.52 KiB) Viewed 2758 times

: DSCN3786.JPG (71.75 KiB) Viewed 2758 times

: DSCN3787.JPG (78.28 KiB) Viewed 2758 times

The other side is bit rusty and need some Rustol & POR15 before I mount the arms

: DSCN3788.JPG (72.95 KiB) Viewed 2758 times

Posted: **Sat Jan 21, 2017 6:55 pm**

Next...

: DSCN3789.JPG (79.76 KiB) Viewed 2709 times

: DSCN3791.JPG (87.73 KiB) Viewed 2709 times

: DSCN3792.JPG (72.19 KiB) Viewed 2709 times

: DSCN3793.JPG (81.42 KiB) Viewed 2709 times

: DSCN3794.JPG (82.84 KiB) Viewed 2709 times

: DSCN3795.JPG (61.06 KiB) Viewed 2709 times

: DSCN3796.JPG (62.19 KiB) Viewed 2709 times

: DSCN3797.JPG (137.76 KiB) Viewed 2709 times

: DSCN3798.JPG (134.97 KiB) Viewed 2709 times

: DSCN3799.JPG (74.35 KiB) Viewed 2709 times

: DSCN3800.JPG (82.66 KiB) Viewed 2709 times

: DSCN3801.JPG (86.83 KiB) Viewed 2709 times

: DSCN3802.JPG (90.23 KiB) Viewed 2709 times

: DSCN3803.JPG (70.19 KiB) Viewed 2709 times

: DSCN3804.JPG (70.81 KiB) Viewed 2709 times

: DSCN3805.JPG (86.73 KiB) Viewed 2709 times

: DSCN3807.JPG (88.66 KiB) Viewed 2709 times

So far, impossible to remove the last tab. Just put some WD40 and hope it will work.
For those who mount the Eibach spring with the Spax shock, what is the height of the screw from bottom to top please?

Posted: **Sat Jan 21, 2017 11:32 pm**

For my stuck tab, I had to hacksaw the bolt (hacksaw blade held in a rag) and cut it. Into 3 :twisted:

An option if you can't hit it out with a hammer!

Good luck!

A

Posted: **Sun Jan 22, 2017 12:47 am**

I spy DMC Midwest Inconel TABs, wise choice sir.

Posted: **Sun Jan 22, 2017 6:40 pm**

Thanks for the advice guys

Replaced the two rusty bold for safety

: DSCN3809.JPG (47.49 KiB) Viewed 2670 times

: DSCN3810.JPG (44.05 KiB) Viewed 2670 times

: DSCN3811.JPG (77.4 KiB) Viewed 2670 times

New poly and stainless plate and bolt and new tab

: DSCN3812.JPG (37.59 KiB) Viewed 2670 times

: DSCN3813.JPG (53.2 KiB) Viewed 2670 times

: DSCN3814.JPG (55.07 KiB) Viewed 2670 times

: DSCN3815.JPG (56.55 KiB) Viewed 2670 times

Now the other side, once I will succeed to remove the old tab

Posted: **Sat Jan 28, 2017 8:51 pm**

So far, the arm is on the floor.
I still have to remove the bolt. I cut it and drill it, but still not good.
I have to drill bigger but just can't do it now.

: DSCN3816.JPG (70.81 KiB) Viewed 2615 times

: DSCN3817.JPG (75.35 KiB) Viewed 2615 times

: DSCN3818.JPG (77.25 KiB) Viewed 2615 times

: DSCN3819.JPG (74.42 KiB) Viewed 2615 times

Posted: **Sun Jan 29, 2017 6:43 pm**

At last, removed this damn TAB

: DSCN3821.JPG (63.1 KiB) Viewed 2589 times

Cleaning the rust point (weird the one on the other side didn’t have a spot of rust…=

: DSCN3822.JPG (89.13 KiB) Viewed 2589 times

: DSCN3823.JPG (95.37 KiB) Viewed 2589 times

Applied some Rustol and the nit will be POR15

: DSCN3824.JPG (73.35 KiB) Viewed 2589 times

: DSCN3825.JPG (72.37 KiB) Viewed 2589 times

Posted: **Sat Feb 04, 2017 6:29 pm**

Removed the old 21 years old tires this morning, it’s time to change for something new for safety

: DSCN3826.JPG (67.45 KiB) Viewed 2546 times

Last layer of Rustol to protect the arm against the rust

: DSCN3829.JPG (61.37 KiB) Viewed 2546 times

Poly on the passage side

: DSCN3830.JPG (110.61 KiB) Viewed 2546 times

: DSCN3832.JPG (115.1 KiB) Viewed 2546 times

Stainless steel brake line

: DSCN3833.JPG (106.64 KiB) Viewed 2546 times

: DSCN3835.JPG (67.77 KiB) Viewed 2546 times

: DSCN3836.JPG (129.29 KiB) Viewed 2546 times

I’m unable to screw it for now, time to get some rest

: DSCN3837.JPG (156.38 KiB) Viewed 2546 times

Posted: **Sun Feb 05, 2017 6:36 pm**

The arm is back with new tab and screws

: DSCN3838.JPG (41.15 KiB) Viewed 2514 times

: DSCN3839.JPG (45.44 KiB) Viewed 2514 times

: DSCN3840.JPG (102.84 KiB) Viewed 2514 times

: DSCN3841.JPG (42.97 KiB) Viewed 2514 times

: DSCN3842.JPG (91.39 KiB) Viewed 2514 times

New stainless brake line, not so easy because it wasn’t exactly the same pattern

: DSCN3843.JPG (88.1 KiB) Viewed 2514 times

: DSCN3844.JPG (64.31 KiB) Viewed 2514 times

: DSCN3845.JPG (83.38 KiB) Viewed 2514 times

Old steering will be replaced by a stainless one, as soon as I will succeed to remove it

: DSCN3846.JPG (89.36 KiB) Viewed 2514 times

: DSCN3847.JPG (56.17 KiB) Viewed 2514 times

Posted: **Sun Feb 12, 2017 6:13 pm**

Removing the old steering, it was a little bit rusty

: DSCN3848.JPG (78.32 KiB) Viewed 2458 times

: DSCN3849.JPG (92.56 KiB) Viewed 2458 times

: DSCN3850.JPG (111.64 KiB) Viewed 2458 times

I’d like to change the bushing, but I’m afraid I need to remove the steering wheel from inside?

: DSCN3852.JPG (73.58 KiB) Viewed 2458 times

Old VS new one

: DSCN3853.JPG (65.05 KiB) Viewed 2458 times

Before and after cleaning

: DSCN3854.JPG (76.95 KiB) Viewed 2458 times

De Lorean EuroTec

VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior

Re: VIN# 16951 - August 1982 - Manual - Black Interior