De Lorean EuroTec

Yes, especially after 2 years working on the car and not be able to drive it, now the sun is coming...

The clutch pedal is working fine, even when the engine is running. I am able to go to first gear and release the clutch pedal then accelerate but the car doesn't move. The gear is on and if I don't press the pedal I can't move it, so that's good. I have to press the pedal to change gear.

I wasn't sure if I was able to remove the gearbox on axle stands because of their height and the weight of the gear box.
But if you did it, I may be able to do it also. Do you have any pic somewhere by any chance?
No, I still did not ordered any parts, as it occurred yesterday.

Thanks, I'll try to keep the faith, but I must admit, I'm angry against the car right now, I took care of her during the past two year and she made me another problem...
Will I be able to come to the UK someday to meet all the team, I hope so!

Sorry Domi, no pics of box removal.

I bought this to help me: https://www.amazon.co.uk/Draper-53095-F ... B000MPRJD4. But I know people here have done it without.

I think the car had to be quite high, and I also had it on stands at the front- I was doing everything at the time.

My feeling with these cars is always that you are better doing it yourself than giving it to a garage if you can. It will be cheaper and almost certsinly a better job. In my case, though, it is always just really slow.

I need to take my box out again at some point for the synchro to be replaced. In this case I will remove the box myself tho and deliver it to a UN1 specialist for the work I think... one instance where I may not do everything myself!,

Some notes, maybe not relevant

viewtopic.php?f=19&t=4504&hilit=+Clutch#p60352

viewtopic.php?f=19&t=4056&hilit=Clutch

viewtopic.php?f=19&t=4043&hilit=Clutch&start=10

viewtopic.php?f=19&t=4044

viewtopic.php?f=19&t=4505

I also did this
http://dmctalk.org/showthread.php?10333 ... ual-tranny

Sorry mate, that is all quite boring but we are boring!! Good luck.

Andy

The amazon link is quite interesting!
Anyway, thanks for the good advice.
You're right, I prefer to do the job myself, even if I spent several month, at least the car is at home and once the job is done, it's quite satisfying

My new best friend

Hello everyone, it’s already been a long time since my last message.
I was working on my house, so the car had to wait until now…
I would like to order a kit like this one from J. Hervey but here.

I need your help to tell me if everything in the picture above is in my list?
https://www.deloreango.com/fr/complete-clutch-kit.html
K102512 Valeo Clutch Kit
221,99 €

102024 Crankshaft Rear Main Seal (double lipped)
12,99 €

102022 Rear Seal Gasket
1,25 €

102569 Flywheel Pilot Bearing (SKF)
15,99 €

https://www.deloreango.com/fr/clutch-al ... -tool.html
Clutch Alignment Tool
21,99 €

I will be on holidays in the next few weeks, so I'll be able to order soon.
Once again, thank you very much for your kind help.

In your picture, but not on your list, is this:

https://www.deloreango.com/fr/clutch-re ... l-cap.html


Otherwise - yes, that's it.

Thanks again, I will order when I will be back at home.

And even a throwout bearing.

Hello, order done just today

Parts received today, that was really fast!!!

All I need now is to find some free time to begin the job...