RPM Relay Socket

[RobvdVeer]

PO removed the socket, now its just loose wires and spades. Does anybody know a brand/model replacement part? So such parts listed on normal vendor sites.

[Admin-bloke]

You can ask Dan and Gez and see if they can snip off the socket (and leaving some cable on it) from the car they are taking the engine out of........

[Dan 6511]

How about a plug cut off another loom, you could solder/heatshrink the wires onto your loom...?

[RobvdVeer]

How about a plug cut off another loom, you could solder/heatshrink the wires onto your loom...?

Brilliant. My search just went from a single socket to a single socket and a loom.

[Dan 6511]

We can probably cut one off the Volvo we are ripping the engine from.

[RobvdVeer]

Smashing!

Its probably only a 0.20€ part so it should be available somewhere. Let me give EdU a ring too.

[RobvdVeer]

Could this be it?

http://www.rdae.nl/multistekkers/multico...ts_id/1266

or

http://www.rdae.nl/multistekkers/multic ... ts_id/1202

Categorized as 6.3mm connectors. 2x3.



Edit: www.rdae.nl also stocks those hard-to-find bosch connectors to the WUR/CSV etc.

[Admin-bloke]

Looks like the one.
The blade connectors are definately 6.3mm

Does this include the blade connectors themselves or is it ust the socket?

[RobvdVeer]

The site sells different variations/combinations of the sockets. Male, Female, with/without pins.. There's a complete set for €2.00 i'll be checking it out. To save on P&P i'll put together a list of may-need items.

[bozzzydmc]

Rob are the spades on the relay wires the type with the little 'tang' on ? If so then these will just push back into your new socket ...