Y-Pipe switches wanted

[dmc4087]

I need the two switches that are circled below

I probably need a y-pipe too if anybody has a spare?



Top
Lambda switch - 102478

Bottom
(Cant find this one on DMCH, know what it is?)

[Admin-bloke]

The bottom one is the idle ecu thermistor.

There are 2 volvo types. Get the one which is 12k ohms at 20 degrees !

I can't remember the Bosch part number....

[dmc4087]

Thanks AB

Found it on DMCH site too.
http://www.delorean.com/store/p-6749-th ... speed.aspx

[bozzzydmc]

Problem with that one is that it doesnt actually do what it is supposed to do

[dmc4087]

Problem with that one is that it doesnt actually do what it is supposed to do

Is it needed then?

[Admin-bloke]

Problem with that one is that it doesnt actually do what it is supposed to do

Is it needed then?

Yes it is.

What Bozzzy is trying to say is that for the ecu to work correctly it needs another 10k ohm resistor wired in series with it.

Some gorgeus Admin-bloke found that out xx

[tourettes tony]

i think i have them il look later TT

[dmc4087]

Thanks AB - can you stop messing about and just come to Ireland and rewire my car? Refit the engine while your at it please

Tony, that would be superb. Thanks

[bozzzydmc]

.. And I still have a few little jumper wires that we made up that don't involve cutting the existing wiring if anyone would like one x

[Admin-bloke]

.. And I still have a few little jumper wires that we made up that don't involve cutting the existing wiring if anyone would like one x

Bozzzys top plug and play inline resistor