Performance air intake
Posted:
Thu Mar 09, 2017 7:27 pm
by Spudmurphy
I was just wondering on one of these to replace the rusty looking stock intake
http://www.deloreanclub.uk/performance-air-intake.htmldoes anybody have a picture of what the actual installation looks like please?
Cheers
Re: Performance air intake
Posted:
Thu Mar 09, 2017 7:57 pm
by gary290
The rusty pipe is a hot air transfer pipe from the the top of the exhaust manifold to the intake pipe, in cold parts of the world it helps get the engine going a bit better, the black box is a type of valve that opens and closes depending on the temp, if you don't use the car in a cold part of the word get rid of it and replace with the part listed, i only use my car in summer so i don't need it, if know one else puts up a pic i'll do it tonight
Re: Performance air intake
Posted:
Thu Mar 09, 2017 9:27 pm
by arranj
Couple of random pics - couple of slightly different angle solutions here. As Gary says, it is only very cold, like northern Sweden cold. Something that came over with the Volvo - the part you'd be ripping out actually has "Volvo" stamped on it.
Re: Performance air intake
Posted:
Fri Nov 02, 2018 5:25 pm
by eric
What do I do with the other end of the rusty pipe ? just remove totally and leave a hole.... This explains why I had so much trouble trying to fit with the existing fitting in line
Re: Performance air intake
Posted:
Fri Nov 02, 2018 5:38 pm
by arranj
The metal "hole" on the engine you mean? That's the "stove" which is basically just a piece of metal screwed on, with a hole (that doesn't go anywhere) in it. Just 2 screws and remove it. Or leave it there.
Re: Performance air intake
Posted:
Fri Nov 02, 2018 5:58 pm
by MikeWard
eric wrote:What do I do with the other end of the rusty pipe ? just remove totally and leave a hole.... This explains why I had so much trouble trying to fit with the existing fitting in line
Remove everything you see here.
- OE air intake.jpg (401.8 KiB) Viewed 3464 times
Re: Performance air intake
Posted:
Fri Nov 02, 2018 7:28 pm
by eric
Super thanks, quite a space saving
Re: Performance air intake
Posted:
Sat Nov 03, 2018 11:21 am
by TristanC
I’ve been thinking about this too.
Thanks for asking the question Kevin, and thanks Mike W for showing what to remove
Happy days. I’ll be doing this soon.
Tris
Re: Performance air intake
Posted:
Sun Nov 04, 2018 1:34 am
by Spudmurphy
I bought the new hose from Ed - well I was in Amsterdam anyway so why not ?
I ended up buying an aluminium Air intake cone from Ash silicone hoses and bonded it in with some wurth bond. I later made some sexy SS bands for Ed's hose and it's looking good.
This is an old pic with the old coolant bottle ... but you can see the cone.