De Lorean EuroTec

I've got an engine sat on a stand that i might as well start parting.

I've not got the main pulley, the lower crank, pan, sandwich plate or flywheel

I assume im alright posting this in here?
cheers
Dave.

need you ask il take whatever you have pm me a price dave Cheers tt

InoX wrote:I've got an engine sat on a stand that i might as well start parting.

I've not got the main pulley, the lower crank, pan, sandwich plate or flywheel

I assume im alright posting this in here?
cheers
Dave.

Nice one Dave.
Be worth getting to Tony to see if he can make a good one out of all of the spares he has

Is it just the block of any other stuff on it like k-jet/ distributor etc???

it's the whole smash minus the parts listed above. The pulley was rusted through. you've seen the state of the car it came off, so no surprises there.

oh, and the water pump had had it, too. I've had the rocker covers off and the inside is nice and oily nothing wrong there, but it's only a light inspection doesn't really tell you much.

I've never had the motor running, but i doubt that's a major concern if Tony or whoever is only after parts. I'll hoover out the valley and let you know what i find by the way of my new digital camera.


I have computers also. Not sure if they work. all three. Naturally, I'm discounting the 30 year old fuel lines and injectors from this. (unless you want injectors?)


I've got the shitty exhaust, too if anyone wants that?

EDIT: it does not have the warm up regulator! sorry i forgot. long story short; it's in my other car (the WUR in my other car was an audi part or something (cheap rebuild)

Mec might want the zorst, his one has been butchered and the cat bypass pipe wont fit.

it's 3193, im talking about which is August 81. it's the mid range exhaust wider openings not polished.

when i say exhaust i mean the muffler AND cross over pipe and manifold, but i suppose the pipe and manifold are somewhat obsoleted and i don't expect to sell.

I think its the crossover pipe he needs. I'll tell him to get his ass on here.

well il take what ever is there, i have enough parts to make a spare engine then, and possibly (dependent on cams) another volvo spec HC engine just to add i am non profit i do it for the love

Dan 6457 wrote:I think its the crossover pipe he needs. I'll tell him to get his ass on here.

I have the crossover pipe, the one that goes around the back of the engine which connects both manifolds together.
I can bring it to Arrans next week if he wants it...

InoX wrote:it's the whole smash minus the parts listed above. The pulley was rusted through. you've seen the state of the car it came off, so no surprises there.

oh, and the water pump had had it, too. I've had the rocker covers off and the inside is nice and oily nothing wrong there, but it's only a light inspection doesn't really tell you much.

I've never had the motor running, but i doubt that's a major concern if Tony or whoever is only after parts. I'll hoover out the valley and let you know what i find by the way of my new digital camera.


I have computers also. Not sure if they work. all three. Naturally, I'm discounting the 30 year old fuel lines and injectors from this. (unless you want injectors?)


I've got the shitty exhaust, too if anyone wants that?

EDIT: it does not have the warm up regulator! sorry i forgot. long story short; it's in my other car (the WUR in my other car was an audi part or something (cheap rebuild)

I will take the injectors off your hands if they're going.

I'm sure between all thi and everyones spares we could knock something together.

How about a job lot price for Tony to buy the lot from you...?

Tony I think I have a spare known working CPR..........