Re: VIN 2327 From white to stainless
Posted: Wed Mar 03, 2021 1:40 pmThanks !
- mot-in.png (1.24 MiB) Viewed 7158 times
- mot-out.png (1.76 MiB) Viewed 7158 times
De Lorean EuroTec
The DeLorean Club UK forum for European DeLorean owners and enthusiasts.
http://www.deloreaneurotec.uk/
VIN 2327 From white to stainless
Page 2 of 3
Posted: Wed Mar 03, 2021 1:40 pmEngine out
Posted: Sun Mar 07, 2021 6:15 pmEngine is out !
Re: VIN 2327 From white to stainless
Posted: Mon Mar 08, 2021 12:12 pmLovely pics......
Re: VIN 2327 From white to stainless
Posted: Sun Mar 14, 2021 9:10 pmA bit messy today, but what a day !
- messy.jpg (136.32 KiB) Viewed 7074 times
Re: VIN 2327 From white to stainless
Posted: Sun Mar 14, 2021 9:12 pmI'm a bit puzzled, it's "chewed" , isn't ?
- chewed1.jpg (35.91 KiB) Viewed 7074 times
- chewed2.jpg (27.79 KiB) Viewed 7074 times
Re: VIN 2327 From white to stainless
Posted: Tue Mar 16, 2021 3:58 pmO most definitely has to be!
Re: VIN 2327 From white to stainless
Posted: Wed May 19, 2021 5:39 pmHello mes amis,
the workshop is a bit cleaner now, the chassis is almost stripped, ready to be sandblasted and repainted
I made some room to install an oven for powder coating and some buckets for anodizing
results are quite promising
I do have a question for all of you: as the car is completely dismantled, I'm considering retrofitting the car to 100% electric, with a 120Hp Hyper 9 motor.
Does it make any sense for you ?
Cheers,
S.
the workshop is a bit cleaner now, the chassis is almost stripped, ready to be sandblasted and repainted
- IMG_20210402_183428270.jpg (273.87 KiB) Viewed 6898 times
I made some room to install an oven for powder coating and some buckets for anodizing
- IMG_20210418_152546509.jpg (395.85 KiB) Viewed 6898 times
results are quite promising
- IMG_20210417_193437886.jpg (425.06 KiB) Viewed 6898 times
I do have a question for all of you: as the car is completely dismantled, I'm considering retrofitting the car to 100% electric, with a 120Hp Hyper 9 motor.
Does it make any sense for you ?
Cheers,
S.
Re: VIN 2327 From white to stainless
Posted: Wed May 19, 2021 9:32 pmIf you want to loose a shed load of it’s value, go for it
Re: VIN 2327 From white to stainless
Posted: Wed May 19, 2021 10:28 pmI like the idea, but agree about the resale value. For now! Am seriously considering electric for my next daily.
A
A
Re: VIN 2327 From white to stainless
Posted: Thu May 20, 2021 4:38 pmbandit wrote:If you want to loose a shed load of it’s value, go for it
Be mindful that it'll be less 10% hp (same torque? ), less driving range, not supported installation for future owners as it'll be custom (unless completely fully documented).
It's your car at the end of the day, and definitely a challenging project to do. If doing this gives you pleasure then why not?
I'm sure you could get some money back from the sale of your engine if in good working non leaking non corroded condition.
I'll be the first to be last when it comes to EV, they don't do anything for me.