Re: VIN# 16951 - August 1982 - Manual - Black Interior
Posted:
Wed Sep 13, 2017 7:34 pm
by Admin-bloke
Nobody got hurt or injured, which is the main thing. It's easier to fix metal and plastic than it is flesh and bones.
Good luck with it all
Re: VIN# 16951 - August 1982 - Manual - Black Interior
Posted:
Wed Sep 13, 2017 8:48 pm
by Domi
Yes you're right.
I can always repair it with patience and time, it would have been more difficult if I was hurt.
Guess somebody's watching me somewhere, thanks.
Re: VIN# 16951 - August 1982 - Manual - Black Interior
Posted:
Fri Sep 15, 2017 7:33 pm
by Domi
I received my ball joint from the club that was very fast, thank you.
I even received another stainless pin into an envelope, thanks again!
- IMG_6211.JPG (67.66 KiB) Viewed 2833 times
Re: VIN# 16951 - August 1982 - Manual - Black Interior
Posted:
Fri Sep 15, 2017 7:41 pm
by arranj
Wow that really was fast...!
- I sent the stainless pins on Wednesday night, I thought it might be a better idea for you to use those. That is the correct factory size as well now.
Re: VIN# 16951 - August 1982 - Manual - Black Interior
Posted:
Fri Sep 15, 2017 8:42 pm
by Domi
arranj wrote:Wow that really was fast...!
- I sent the stainless pins on Wednesday night, I thought it might be a better idea for you to use those. That is the correct factory size as well now.
Yes, both items arrived at the same time today
Thanks you very much for the SS pins, those won't rust and last for the next 30 years
Re: VIN# 16951 - August 1982 - Manual - Black Interior
Posted:
Sat Sep 16, 2017 6:35 pm
by Domi
Re: VIN# 16951 - August 1982 - Manual - Black Interior
Posted:
Sat Sep 16, 2017 8:12 pm
by arranj
Yes, none of the upper ball joints come with the hole, so you will need to drill it - the procedure is on the attached file. In a further bulletin, the information said "in some cases the castellated nut cutouts may have to be filed deeper to allow insertion of a cotter pin."
Obviously the washer will have to be removed too.
But where did that ball joint come from...? If that is one of Ed's then the castle nut won't match as he uses different threads to the original (his are M12)
Re: VIN# 16951 - August 1982 - Manual - Black Interior
Posted:
Sat Sep 16, 2017 9:04 pm
by Domi
I think I bought the upper ball joint from ED, I have to check my invoice.
Thank you for the PDF file