De Lorean EuroTec

Hello

Does anyone have a fuel tank enclosure plate, i could borrow/buy off them? I need to take measurements off it to create a template, or indeed use the actual plate as a template to have one made up in stainless.

Ed does stainless ones for about 300EUR, but then it's 300EUR.

thanks very much
Dave.

Hi Dave

Have you asked Chris N?

Matt Nickels has his off the car, maybe he could take some measurements?

Or..

http://www.specialtauto.com/delorean-pa ... -plate.jpg

You might be able to recoup your costs if you got one and got it copied.

Or, we have someone in our club whom made stainless product:
http://deloreanlettrage.blogspot.com/
Take a look at the bottom of the page

A Van wrote:Hi Dave

Have you asked Chris N?

Matt Nickels has his off the car, maybe he could take some measurements?

Or..

http://www.specialtauto.com/delorean-pa ... -plate.jpg

You might be able to recoup your costs if you got one and got it copied.

cheers Al and Domi.

DMC DMC DMC!

recouping costs is what i was thinking.

I have half of the original plate that came off of my car, except its doesn't have the two corners to it (rusted )

I'll ask the Matt what he thinks

cheers
Dave.

InoX wrote:

A Van wrote:Hi Dave

Have you asked Chris N?

Matt Nickels has his off the car, maybe he could take some measurements?

Or..

http://www.specialtauto.com/delorean-pa ... -plate.jpg

You might be able to recoup your costs if you got one and got it copied.

cheers Al and Domi.

DMC DMC DMC!

recouping costs is what i was thinking.

I have half of the original plate that came off of my car, except its doesn't have the two corners to it (rusted )

I'll ask the Matt what he thinks

cheers
Dave.

I will take some measurements in the morning if u want and put up a diagram

weeeeeeeeeeeeeeeeeeeeeeee


thanks Matt. that'd be great. I'm interested in the top end more than anything,


cheers!
Dave.

InoX wrote:weeeeeeeeeeeeeeeeeeeeeeee


thanks Matt. that'd be great. I'm interested in the top end more than anything,


cheers!
Dave.

Which ends the top lol

This is from our Kenny on our DOI forum



Should help

Great link Domi!

Some nice stuff there, also a little ironic that the word 'inox' appears in the sellers description of the plate!

Plaque de protection réservoir inox épaisseur 2 mm : 120 Euros

Dave if you go for that option, it may be possible for us to bring one back from Silvercoast in France in May, not sure how soon you need it though.

not ironic, mate Inox is the international symbol for Stainless Steel.

If you've got a penknife it'll probably say somewhere on it 'victorinox'


I'm going to have a stainless company here in the UK make one up and see what's what.

yet again, thanks for your help everyone.

Dave.