DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Welcome to the DeLorean Club Forum, this area is for general DeLorean chat

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Daniel Shane » Fri May 13, 2011 3:55 pm

That was quick.

So what is been made al ? Is it Viva body with chevette shaft ?

Dan
Dan Shane
DCUK 008
Ex VIN 4754

The Black Stig
DeLorean Club

The Future's Bright....
The Future's
DeLorean Club
User avatar
Daniel Shane
 
Posts: 461
Joined: Fri Jun 05, 2009 1:29 pm
VIN #: Ex 4754

DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby A Van » Fri May 13, 2011 4:20 pm

As soon as I got through to the MD we hit it off, he has it appears every balljoint ever made imprinted in his brain, and on a shelf in front of him, whilst I was on phone he called in a machinist to get cracking on them, they just rang up to check we wanted a grease nipple in the spec, which I confirmed we did.
Alistair V

Vin 11753 - B/Auto - Kuwait, painted black
Ex Vin 11766 - B/Auto - Dubai
Ex 11622, 6064

RIP Mike 'Bozzy' Bosworth 19/04/1969 - 31/12/2015


Official Spokesperson and Media Liaison Officer, and off road Buggy flipper
DeLorean Club

The Future's Bright....
The Future's
DeLorean Club
User avatar
A Van
 
Posts: 7821
Joined: Fri May 29, 2009 6:33 pm
VIN #: 11753
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Darren C » Fri May 13, 2011 4:21 pm

Top Secret Dan ;)

Top Work Al, :D
@classiccarguru1
Darren C
 
Posts: 1162
Joined: Wed Jul 22, 2009 8:55 pm
Location: In the garage, Emsworth. Hants
VIN #: 4532
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Phil349 » Fri May 13, 2011 6:21 pm

Bloody excellent Al!!
I cant believe how quick they have done that, manufacturing a part to order, even if it may be assembled from on the shelf parts if it is, normally takes much longer than a mornings work!! Looks like youve made a very usefull contact there!

Looking forward to hearing the out come.

And I totally aggree with the comments on the quality of some after market parts, I've always found this with previous cars, they are cheap, but then theres a normally reason for it!
Although I was surprised to read about the issues elise owners have had with the delphi ball joint, delphi lockheed are a quality manufacturer used as oem by some vehicle manufacturers. The actual product quality of the delphi ball joints I have looks good.
Phil349
 
Posts: 86
Joined: Tue Jul 07, 2009 11:36 pm
VIN #: 1128

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Phil349 » Fri May 13, 2011 6:25 pm

Admin-bloke wrote:Got to say Kudos to all who are contributing this, especially to OCD Darren for being so thorough in his research.

Well done :D


For my part, I've been glad to help. And I am happy that what I found with the special T joints I bought has after all helped and partly led to a better solution for all.
Top work to all involved!
Phil349
 
Posts: 86
Joined: Tue Jul 07, 2009 11:36 pm
VIN #: 1128

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby bozzzydmc » Fri May 13, 2011 6:31 pm

Yes .. a great team effort ! .. cant wait to just see what comes in the post :)
Bozzzy | DCUK 003 | Yorkshire, UK

DeLorean Club
bozzzydmc
 
Posts: 4402
Joined: Fri May 29, 2009 8:30 am

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Darren C » Fri May 13, 2011 9:21 pm

Admin-bloke wrote:
Darren C wrote:As for effect on the geometry with a lotus joint in the De: your lower arm will hang 8mm further from your hub. This will pull the wheel in towards the centre of the car at the bottom where it meets the road and increase the distance away from the car at the top. ie effect your CAMBER angle in a negative way.


As in increase camber positively by about 10-20 Minutes.


Hmmm... I have to disagree with you jedi master ;)

Although I did get the lower and upper arm back to front in my quote above...so I do excuse you. :oops:
To explain: The lower arm sits at rest when spring tension matches the cars weight. On a De this is almost parallel with the ground. So if you fitted a ball joint such as special T or Lotus you'd still have a parallel arm as the weights have not changed. However you have moved up the top arm by the amount of the overlength. This is normally horizontal or slightly angled upwards when the car is sitting on its wheels. Moving it up will strike an arc that moves the top ball joint closer to the centre of the car. This in turn INCREASES NEGATIVE camber.
As the factory set Camber (non adjustable) is 0 to 1/2 a Degree, it increases the negative, not increases positively Nick.

See picture below


Image

As I said earlier this is only a tiny amount, but enough to throw out the geometry.
@classiccarguru1
Darren C
 
Posts: 1162
Joined: Wed Jul 22, 2009 8:55 pm
Location: In the garage, Emsworth. Hants
VIN #: 4532
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Darren C » Sat May 14, 2011 8:48 am

bozzzy wrote:Yes .. a great team effort ! .. cant wait to just see what comes in the post :)



They're here :D

I'll keep you all in suspense until later today when I'll post my findings ;)
@classiccarguru1
Darren C
 
Posts: 1162
Joined: Wed Jul 22, 2009 8:55 pm
Location: In the garage, Emsworth. Hants
VIN #: 4532
Spaxed

DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby A Van » Sat May 14, 2011 9:14 am

Darren C wrote:
bozzzy wrote:Yes .. a great team effort ! .. cant wait to just see what comes in the post :)



They're here :D

I'll keep you all in suspense until later today when I'll post my findings ;)



Getting butterflies now lol
Alistair V

Vin 11753 - B/Auto - Kuwait, painted black
Ex Vin 11766 - B/Auto - Dubai
Ex 11622, 6064

RIP Mike 'Bozzy' Bosworth 19/04/1969 - 31/12/2015


Official Spokesperson and Media Liaison Officer, and off road Buggy flipper
DeLorean Club

The Future's Bright....
The Future's
DeLorean Club
User avatar
A Van
 
Posts: 7821
Joined: Fri May 29, 2009 6:33 pm
VIN #: 11753
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby bozzzydmc » Sat May 14, 2011 9:15 am

You are a tease Barren ! ;)


I can just see you now :)
Bozzzy | DCUK 003 | Yorkshire, UK

DeLorean Club
bozzzydmc
 
Posts: 4402
Joined: Fri May 29, 2009 8:30 am

PreviousNext

Return to Welcome! ... General DeLorean chat

Who is online

Users browsing this forum: No registered users and 4 guests

About us

The DeLorean Club UK forum for European DeLorean owners and enthusiasts. The largest DeLorean forum in Europe.

Registration is FREE and all registered users get full access