DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Welcome to the DeLorean Club Forum, this area is for general DeLorean chat

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Admin-bloke » Sat May 14, 2011 9:46 am

Darren C wrote:
Although I did get the lower and upper arm back to front in my quote above...so I do excuse you. :oops:


No problem Darren :kiss:
Admin-bloke, "The D Whisperer"
Pie n Pint Northerner....
Vin #4068 - y'official "Mighty Auto" test car for Admin-bloke tuning.

https://www.justgiving.com/campnibble

Forum Founder [means I just installed it........] and Tech Help
DeLorean Club

The Future's Bright....
The Future's
DeLorean Club
User avatar
Admin-bloke
 
Posts: 5310
Joined: Thu May 28, 2009 6:45 pm
VIN #: 4068
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Darren C » Sat May 14, 2011 10:31 am

OK The moment we've all been waiting for....





Are you on the edge of your seats?













You should be by now.















ooooooooooooooo its getting exciting.
























can't wait can you?





















Sorry Bozzy, couldn't resist doing it this way... :lol:

















The vital statistics (to the sound of a trumpet fan fare)

















Image
@classiccarguru1
Darren C
 
Posts: 1162
Joined: Wed Jul 22, 2009 8:55 pm
Location: In the garage, Emsworth. Hants
VIN #: 4532
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Darren C » Sat May 14, 2011 10:33 am

The comparison to DMCH joint side by side

Image

And how it looks by gauge

Image

SPOT ON !!!!!!!!!!!!!!!!!!!!!!!
@classiccarguru1
Darren C
 
Posts: 1162
Joined: Wed Jul 22, 2009 8:55 pm
Location: In the garage, Emsworth. Hants
VIN #: 4532
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby RobvdVeer » Sat May 14, 2011 10:35 am

Congratulations!! :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: That is fantastic!
Rob van der Veer
User avatar
RobvdVeer
 
Posts: 4626
Joined: Mon Aug 17, 2009 6:34 pm
Location: Netherlands
VIN #: 0b111001101111
Spaxed

DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby A Van » Sat May 14, 2011 10:38 am

Looks like we have done it!!!!!
Alistair V

Vin 11753 - B/Auto - Kuwait, painted black
Ex Vin 11766 - B/Auto - Dubai
Ex 11622, 6064

RIP Mike 'Bozzy' Bosworth 19/04/1969 - 31/12/2015


Official Spokesperson and Media Liaison Officer, and off road Buggy flipper
DeLorean Club

The Future's Bright....
The Future's
DeLorean Club
User avatar
A Van
 
Posts: 7821
Joined: Fri May 29, 2009 6:33 pm
VIN #: 11753
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Darren C » Sat May 14, 2011 10:44 am

Ok now the serious stuff.

1. No blueing.....I did speak this morning in length with the guy who made these, he laughed when I said the DMCH batch was blue.....softens the metal (we knew that) ;)
2. Also the steel used in these unobtainium joints is a high quality carbon steel VERY HARD.
3. The bottom plate that holds the joint together (has grease nipple in it) is extra thick. Apparently the original DMC joints fail/show wear because this plate bows with the weight of the car pushing down on it. :shock: That opens the gap between cup and ball and you get wear. The Unobtainium joints have a thicker plate to stop this. (discovered through time and knowledge of the product). Unfortunately I think the DMCH joints may follow the original drawing to a T, so have a thin bottom plate.
4.The circlip groove is NOT 2mm as the standard circlip is thinner. With a 2mm wide groove the joint "could" vibrate and wear the spline knurl.
5.The Unobtainium samples have no split pin hole...this is down to choice...the next batch can have them put it. (I plan to drill this out today then trial fit it to my car)
6. With regular greasing the man who made these said it will out last the owner of the car. :D

Ok then....off to fit it now... report to follow. :ugeek:
@classiccarguru1
Darren C
 
Posts: 1162
Joined: Wed Jul 22, 2009 8:55 pm
Location: In the garage, Emsworth. Hants
VIN #: 4532
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Admin-bloke » Sat May 14, 2011 11:13 am

Fantastic news there!

Don't forget the pics of them being fitted :D
Admin-bloke, "The D Whisperer"
Pie n Pint Northerner....
Vin #4068 - y'official "Mighty Auto" test car for Admin-bloke tuning.

https://www.justgiving.com/campnibble

Forum Founder [means I just installed it........] and Tech Help
DeLorean Club

The Future's Bright....
The Future's
DeLorean Club
User avatar
Admin-bloke
 
Posts: 5310
Joined: Thu May 28, 2009 6:45 pm
VIN #: 4068
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby arranj » Sat May 14, 2011 12:04 pm

Nice one Darren! :thumbsup:

So obviously when replacing any existing ball joint you would just carry over your current circlip and it would be fine? The nut thread matches the original, but not if you're replacing the Special T ones. Does the DCUK joint come with a nut? Nylock?
Arran | DCUK 004 | VIN #1764 | Official DeLorean Club World Headquarters, Norfolk, UK

Das Webmeister
DeLorean Club

Image
User avatar
arranj
 
Posts: 7664
Joined: Fri May 29, 2009 6:19 pm
Location: DeLorean Club World Headquarters, Norfolk, UK
VIN #: 1764
Spaxed

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Chriss » Sat May 14, 2011 12:15 pm

Wow fantastic work guys, made very intresting reading for what is a very critical part. The split pin / castle nut was a later addition as I beleve there had been a few 'issues' with the standard lock nut, so would be worth adding the split pin hole IMHO. I know the joints I fitted to my old car did not have the hole, they were NOS, so I did add the hole.

Another Eurotec club exclusive... I love it when a plan comes together :) :dmcdoors:

Image
Chris S
1983 DeLorean DMC12 VIN #16327
1998 Lotus Esprit GT3 VIN #2272
1999 Lotus Elise
2011 Lotus Evora S
2013 Lotus Exige S
2016 Lotus Evora 400
2019 Lotus Elise Cup 250
1990 Porsche 944 S2
2016 Ford Mustang 5.0 GT

1981 DeLorean DMC12 VIN #6328

"I gonna sing you a song" :mrgreen:

Lotus Liaison / junior J&D inspector
DeLorean Club
User avatar
Chriss
 
Posts: 1005
Joined: Mon Jun 08, 2009 11:12 am
VIN #: Ex 16327

Re: DMCH Lower ball joints IS THIS WHY THEY FAIL??????

Postby Dan 6511 » Sat May 14, 2011 12:20 pm

I would be happier using a nyloc nut personally.
Sell it Or Sorn it

Road trips:
2008: Mervyn's Delorean Weekend, Ireland
2008: DMC Europe Open House
2009: DMC Europe Open House
2009: Royal Delorean Weekend, Ireland
2010: Silvercoast, France
2010: Shanefest, Ireland
2010: Luxemburg & Nurburgring
2011: Eurofest, Belfast
2019: International DeLorean Meeting, Hamburg
User avatar
Dan 6511
 
Posts: 3538
Joined: Fri Jun 05, 2009 5:10 pm
Location: Essex

PreviousNext

Return to Welcome! ... General DeLorean chat

Who is online

Users browsing this forum: No registered users and 4 guests

About us

The DeLorean Club UK forum for European DeLorean owners and enthusiasts. The largest DeLorean forum in Europe.

Registration is FREE and all registered users get full access