Gaskets

[mec]

Hi All

Does the club sell an engine gasket kit ? i need to replace my rocker gaskets and front engine casing gasket and possibly the sump gasket too, does anyone have these or know where I can get em ? i cant remember when i got them from when i did my engine

mec

[delorean12uk]

I might have some, bear with me as I'm at work at the moment, i will let you know what i've got when i get home x

[mec]

thanks Jason luvly jubly

[arranj]

The page is here: viewtopic.php?f=66&t=382

Rather than stock them ourselves, you just buy them direct from our supplier. Or the direct link is here: http://www.ebay.co.uk/itm/120457060814
£63 for the full set including fast delivery.

If you only need a few gaskets and you're pretty specific about what you want, you can phone them (number on the listing) - they are usually quite accommodating. Obviously just say it's for a "VOLVO 260 760 2.8 V6 B28E INJECTION".

[Dan 6511]

No sump gasket though in that kit.

Have a word with Josh Bengston in the states. He's had new sump gaskets made out of a better material than the originals, and postage even from the US should be peanuts for a gasket.

[jamesrguk]

Mec let me know on the sump gasket as I'd like to replace mine too.

J

[ALEXAKOS]

I got a spair set of gaskets.
Rockers and I think one sump is also in my inventory.
will check and let you know

[ALEXAKOS]

This is what I have:
102024 SEALING RING (REAR MAIN SEAL) Price: $24.95
102573 SEAL, CRANKSHAFT FRT Price: $7.44
102256 VALVE (ROCKER) COVER GASKET 456 (LH WHEN FACING ENGINE) Price: $11.78
102249 VALVE (ROCKER) COVER GASKET 123 (RH WHEN FACING ENGINE) Price: $11.78
102284 INTAKE MANIFOLD GASKETS (PAIR) Price: $1.49
2X 102152 GASKET, FLANGE Price: $1.10
102197 GASKET - TIMING CVR Price: $12.68
Totals 72.32 USD
All NEW and original from DMCH bought in excess.



Will ship FREE and REGISTERED to that total.

[ALEXAKOS]

Small advice to the sump gasket. Do not change if not leaky.
If leaky prefer an upgraded release and not the DMCH standard one. I have heard of weaknesses. I got mine off an renault alpine reto parts site in Germany. Much meatier and better to work with. DPI also has a nice release.

[jamesrguk]

I have that gasket set, I just need the main crank seal for the front of the engine the one which leaks between the engine an gearbox.

I have to say the sump gasket looks pretty thin, I'm with you that of it isn't leaking probably best not to change it.

J