Project 3193

[InoX]

new fuse box install got finished on the weekend. got in a bit of a pickle with 10 and 11. same colour wires and i took both labels off which told me which was which. I think I've sorted it




You'll notice that the box is on the loom, but the loom is out of the compartment. I'm having to pull the metal bracket out to have it powdercoated.


does anyone know where i can get the washers/spacers/reinforcers that the seats bolt into? mine are corroded:




might have to get a couple of stainless washers and tiger seal them in place or lay some resin down.

cheers!


Trying desperately to maintain my enthusiasm.

[RobvdVeer]

Trying desperately to maintain my enthusiasm.

You're doing great, so keep it up! I've seen you do things I need to put on my list as well, so thank you for that...

[InoX]

cheers mate.

just ordered dynomat. I can get the interior straightened out and start laying that stuff next.

should make the beast look tidier at least.

[A Van]

Stonkingly good work Dave, please keep it up.

[Dan 6511]

Hi Dave, if you can get the measurements of the spacers I can make you some up on the Lathe

[InoX]

hmmm. lathe........

I've called it a night tonight. tired of pealing, scraping and sanding glue off the fibreglass.

going to see if i can find a non corroded spacer tomorrow under all this crap.

thanks Dan weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

it'll probably be something like this:



is this possible?

I'll then be able to just press/clamp the two together and seal with resin/PU

cheers!

[Dan 6511]

Yeah that's easy enough to make

[InoX]

hi

I've added in dimensions.




is this OK?what were you going to make it out of 304 or Alu?

let me know how much you want for a set of 8.

thanks for your help.
Dave.

[Dan 6511]

I'll have to check what stock I have. I'd use either ally or stainless but would steel be ok if zinked?

[InoX]

aye. cheers!


I've got parts to be sent to the platers anyway. cheers.