VIN# 16951 - August 1982 - Manual - Black Interior

[Domi]

Just did a little painting on the bracket

DSCN3500.JPG (62.72 KiB) Viewed 3783 times

[RobvdVeer]

I notice the full scale wiring diagram poster, just as i have on my garage wall. Love the pictures of the progress!

[Domi]

Thanks!
Finally removed the old stereo unit

DSCN3503.JPG (88.18 KiB) Viewed 3757 times

DSCN3504.JPG (66.65 KiB) Viewed 3757 times

[Domi]

New spire nut

DSCN3505.JPG (40.18 KiB) Viewed 3718 times

POR15

DSCN3506.JPG (95.02 KiB) Viewed 3718 times

And POR15 everywhere to avoid rust in the future

DSCN3508.JPG (47.01 KiB) Viewed 3718 times

DSCN3510.JPG (61.62 KiB) Viewed 3718 times

DSCN3511.JPG (64.93 KiB) Viewed 3718 times

New rock screen

DSCN3512.JPG (77 KiB) Viewed 3718 times

[Domi]

Second layer of POR15

DSCN3513.JPG (54.33 KiB) Viewed 3682 times

And add a new ground to the ECU

DSCN3514.JPG (58.19 KiB) Viewed 3682 times

DSCN3515.JPG (70.43 KiB) Viewed 3682 times

[Domi]

Painting... again

DSCN3516.JPG (107.04 KiB) Viewed 3654 times

DSCN3517.JPG (129.86 KiB) Viewed 3654 times

I had to remove POR15 on the bracket because it didn't hold on. So, now I wonder if I try to paint it black or invisible paint to protect it like it is now.

DSCN3519.JPG (58.41 KiB) Viewed 3654 times

A little bit tired after all the work done so far...

DSCN3518.JPG (56.57 KiB) Viewed 3654 times

[Domi]

Just changed the ground wire from the battery

DSCN3522.JPG (56.45 KiB) Viewed 3627 times

The old one was rusty

DSCN3523.JPG (23.49 KiB) Viewed 3627 times

Finally painted black anti rust

DSCN3524.JPG (87.7 KiB) Viewed 3627 times

[Domi]

The radiator and fans and back on the car, not so easy lying under the car
Replacing the bracket, new horns with stainless bracket and also stainless bracket for the radiator.

DSCN3526.JPG (59.01 KiB) Viewed 3584 times

DSCN3527.JPG (72.63 KiB) Viewed 3584 times

DSCN3529.JPG (88.11 KiB) Viewed 3584 times

DSCN3530.JPG (84.65 KiB) Viewed 3584 times

DSCN3531.JPG (92.85 KiB) Viewed 3584 times

DSCN3532.JPG (78.46 KiB) Viewed 3584 times

I’m trying to mount the radiator duck, but not so easy to do it. On side only is okay for now.

DSCN3534.JPG (66.67 KiB) Viewed 3584 times

DSCN3535.JPG (82.3 KiB) Viewed 3584 times

When you take a look on Ed’s site or Houston it’s a two part component now?
We’ll see that tomorrow, after 4 hours of working on the car, I’m a little bit tired.

[Domi]

After a few hours, the radiator duct is finally mounted back.

DSCN3537.JPG (47.43 KiB) Viewed 3568 times

DSCN3538.JPG (83.48 KiB) Viewed 3568 times

DSCN3539.JPG (72.53 KiB) Viewed 3568 times

DSCN3540.JPG (60.95 KiB) Viewed 3568 times

And the last stainless pipes are now back in place

DSCN3541.JPG (84.49 KiB) Viewed 3568 times

DSCN3542.JPG (74.5 KiB) Viewed 3568 times

DSCN3543.JPG (91.31 KiB) Viewed 3568 times

[Domi]

I wanted to redo the level of clutch fluid today and despite the valve is operating, nothing comes out?
Without the valve, the liquid reaches well, so I assume that the valve is defective.
I do not know if I can find it here or if John can provide me another in exchange.

DSCN3544.JPG (84.68 KiB) Viewed 3542 times

DSCN3545.JPG (105.16 KiB) Viewed 3542 times

Otherwise, I installed my new gas line, which should prevent leaks at the filter.

DSCN3549.JPG (51.03 KiB) Viewed 3542 times

DSCN3550.JPG (91.31 KiB) Viewed 3542 times

DSCN3552.JPG (49.88 KiB) Viewed 3542 times